RESIN PLAY Non-Toxic 2-in-1 Resin For Coating & Casting 200g

totalCAST Clear Artwork Resin is a revolutionary hybrid polymer that produces an optically clear, high gloss finish. This brand new formulation represents cutting edge polymeric technology and was developed to offer unrivalled user-friendliness and a crystal clear result every time. totalCAST is our most non-toxic resin that we carry, and it is safe to use at home without the need for respiratory masks. This revolutionary resin is ASTM certified (D-4236) non-hazardous and non-toxic as there are no fumes emitted at ambient temperature. We call this 2-in-1 as it can be used for both coating of artworks and casting (pouring into moulds for embedding, potting, encapsulating and jewellery production). Key Advantages: 1:1 mix ratio,Non-toxic and VOC-free,Odour-free and solvent-free,BPA (Bisphenol)-free,Nonylphenol-free,Built-in air release agents and moisture scavengers,U.V Stable (no need for HALS or U.V blockers) - totalCAST utilises hybrid technology to provide excellent inherent non-yellowing properties.,Fully cured resin (please wait 5 - 7 days for a full cure) is safe for incidental and direct contact with food (e.g. serving), but not suitable for food preparation (e.g. cooking, cutting).,The ASTM D-4236 certification affords us an FDA-exemption for incidental and direct contact with food. , This resin system is used to coat and seal artwork on canvas, wood, mdf, glass, perspex, concrete, metals etc. The product can be applied by pouring, brush or roller. The excellent clarity & optical transparency makes the resin ideally suited for the protection and decoration of paintings, sculptures and collages, photos and prints, wood and timber artefacts (clocks and puzzles etc). pendants, bangles and other jewellery items, flower-setting and paperweights. This resin can be readily pigmented by the addition of any resin pigments sold in our online store. Adding a drop of resi-BLAST will aid in creating cells and lacing effects. Please note: This resin has a heat distortion temperature of 45-50°C which makes it unsuitable for the placement of very hot objects on its surface such as cups, mugs, plates etc. We recommend UltraCast xt for excellent temperature resistance. Mixing: The mixing ratio must be accurately followed to achieve perfect results. It is not possible to change the ratio which would result in the resin not drying properly and lower mechanical properties. The mixed components should be thoroughly stirred for 3-4 minutes to ensure an even consistency. Epoxy systems tend to heat up faster in a pot than as a thin film, only mix the amount needed for use within the pot life of the product. Application: The product can be applied by pouring from the mixing vessel or by brush or roller. This resin can be readily pigmented by the addition of any resin pigments sold in our online store. Adding a drop of resi-BLAST will aid in creating cells and lacing effects.